In short
Short answer: the Township Zone (TZ) is a Victorian planning zone set out in clause 32.05 of the Victoria Planning Provisions and applied to land through each council's planning scheme. In the clause's own words, its first purpose is: “To provide for residential development and a range of commercial, industrial and other uses in small towns”. (Department of Transport and Planning (Victoria), verified 27 Sep 2026)
A zone sets the main purpose of the land and what can be built on it; every Victorian lot has one.
What it typically means for a buyer (Delora editorial, not legal advice): The standard zone for small towns, allowing housing with a limited mix of local shops and services nearby.
Check whether the Township Zone applies to an address with Address Check. For a decision on a specific property, the official record is a Planning Property Report from VicPlan, and the council's schedule sets the local detail.
What the clause says
Clause 32.05 of the Victoria Planning Provisions (Township Zone) states its purposes as: to provide for residential development and a range of commercial, industrial and other uses in small towns; to encourage development that is responsive to the neighbourhood character of the area; and to allow educational, recreational, religious, community and a limited range of other non-residential uses to serve local community needs in appropriate locations. (Department of Transport and Planning (Victoria), verified 27 Sep 2026)
Ask your conveyancer: Which schedule applies to this land, and what does it require?
Shown on planning scheme maps as TZ.
What can I build? Worked examples
General examples of how state-wide rules apply, not an assessment of any property. The council's schedule and other overlays on the lot can add requirements; Address Check shows which apply to one address.
Example: a granny flat on a 650 m² lot in the Township Zone
An owner wants to add a self-contained second home of 55 m² behind the existing house. Victoria calls this a small second dwelling: 60 m² or less, on the same lot as an existing home. Where no flooding, environmental or other special planning control applies, it no longer needs a planning permit (Department of Transport and Planning (Victoria), verified 20 Aug 2026), and on a lot of 300 m² or more Clause 54 does not normally apply (Department of Transport and Planning (Victoria), verified 20 Aug 2026). A building permit is still required, and it cannot be subdivided or sold separately from the main home (Department of Transport and Planning (Victoria), verified 20 Aug 2026). It must not be connected to reticulated gas (Department of Transport and Planning (Victoria), verified 20 Aug 2026).
Example: the same granny flat on a 280 m² lot
Under 300 m², a small second dwelling in the Township Zone needs a planning permit, assessed against Clause 54 (Department of Transport and Planning (Victoria), verified 20 Aug 2026); the Township Zone is one of the six zones where that applies (Department of Transport and Planning (Victoria), verified 20 Aug 2026). If the design meets the relevant Clause 54 standards, the application can go through VicSmart, which decides eligible applications within 10 business days with no public advertising (Department of Transport and Planning (Victoria), verified 20 Aug 2026).
More detail: Building a granny flat in Victoria.
How much of Victoria this covers
From the 2899 sample suburbs Address Check's export has processed so far — a lower bound, not a statewide total, until the export runs statewide.
54,207 land parcels and 58,763 addresses in the sample so far.
Councils with the most coverage
- South Gippsland (4939 lots)
- Buloke (2721 lots)
- Mount Alexander (2612 lots)
- Loddon (2467 lots)
- Colac Otway (2314 lots)
- Campaspe (2107 lots)
Suburbs with the highest share
- Cardigan Village — 100% of addresses checked (358)
- Venus Bay — 96% of addresses checked (2471)
- Warneet — 94% of addresses checked (270)