In short
Short answer: the Residential Growth Zone (RGZ) is a Victorian planning zone set out in clause 32.07 of the Victoria Planning Provisions and applied to land through each council's planning scheme. In the clause's own words, its first purpose is: “To provide housing at increased densities in buildings up to and including four storey buildings”. (Department of Transport and Planning (Victoria), verified 27 Sep 2026)
A zone sets the main purpose of the land and what can be built on it; every Victorian lot has one.
What it typically means for a buyer (Delora editorial, not legal advice): Intended for more housing at higher densities, so taller buildings and more construction nearby are typical over time.
Check whether the Residential Growth Zone applies to an address with Address Check. For a decision on a specific property, the official record is a Planning Property Report from VicPlan, and the council's schedule sets the local detail.
What the clause says
Clause 32.07 of the Victoria Planning Provisions (Residential Growth Zone) states its purposes as: to provide housing at increased densities in buildings up to and including four storey buildings; to encourage a diversity of housing types in locations offering good access to services and transport including activity centres and town centres; to encourage a scale of development that provides a transition between areas of more intensive use and development and other residential areas; to ensure residential development achieves design objectives specified in a schedule to this zone; and to allow educational, recreational, religious, community and a limited range of other non-residential uses to serve local community needs in appropriate locations. (Department of Transport and Planning (Victoria), verified 27 Sep 2026)
Ask your conveyancer: Are there permits or applications for development on nearby sites?
Shown on planning scheme maps as RGZ.
What can I build? Worked examples
General examples of how state-wide rules apply, not an assessment of any property. The council's schedule and other overlays on the lot can add requirements; Address Check shows which apply to one address.
Example: a granny flat on a 650 m² lot in the Residential Growth Zone
An owner wants to add a self-contained second home of 55 m² behind the existing house. Victoria calls this a small second dwelling: 60 m² or less, on the same lot as an existing home. Where no flooding, environmental or other special planning control applies, it no longer needs a planning permit (Department of Transport and Planning (Victoria), verified 20 Aug 2026), and on a lot of 300 m² or more Clause 54 does not normally apply (Department of Transport and Planning (Victoria), verified 20 Aug 2026). A building permit is still required, and it cannot be subdivided or sold separately from the main home (Department of Transport and Planning (Victoria), verified 20 Aug 2026). It must not be connected to reticulated gas (Department of Transport and Planning (Victoria), verified 20 Aug 2026).
Example: the same granny flat on a 280 m² lot
Under 300 m², a small second dwelling in the Residential Growth Zone needs a planning permit, assessed against Clause 54 (Department of Transport and Planning (Victoria), verified 20 Aug 2026); the Residential Growth Zone is one of the six zones where that applies (Department of Transport and Planning (Victoria), verified 20 Aug 2026). If the design meets the relevant Clause 54 standards, the application can go through VicSmart, which decides eligible applications within 10 business days with no public advertising (Department of Transport and Planning (Victoria), verified 20 Aug 2026).
More detail: Building a granny flat in Victoria.
How much of Victoria this covers
From the 2899 sample suburbs Address Check's export has processed so far — a lower bound, not a statewide total, until the export runs statewide.
37,110 land parcels and 71,139 addresses in the sample so far.
Councils with the most coverage
- Greater Geelong (4749 lots)
- Brimbank (3942 lots)
- Melton (3412 lots)
- Casey (3018 lots)
- Manningham (2602 lots)
- Yarra Ranges (2252 lots)
Suburbs with the highest share
- St Kilda West — 33% of addresses checked (703)
- Bellfield (banyule - Vic.) — 31% of addresses checked (384)
- Heidelberg West — 27% of addresses checked (1324)
- Burwood East — 25% of addresses checked (1509)
- Drysdale — 25% of addresses checked (832)
- Melton — 25% of addresses checked (1329)